M-210G Power for access(5A)
1.For any lock, access control.
2.Input voltage: 220VAC.50HZ output power: DC12V/5A Delay setting: 1S-15S 3.Dimension: 192 (L) *54 (W) *43 (H) mm
4.The access control project special supporting, but also unlock and open the door. Provide 12V DC power supply, control output control lock, the wiring is very convenient. Operated at the same time, will be issued by the automatic gate delay dry contact signal. The output current capacity is large, up to 3A, small size.
M-208H Narrow fingerprint access control
Description of this Narrow fingerprint access control Door Lock System
1.Can be used as an intelligent card reader, and the fingerprint is used as a door opening key. The utility model has wide application range and can be used in modern offices.
2.Fingerprint capacity: 1000 card capacity: 1000 Bell function: Yes (need to answer doorbell)
Default setting is 45 degree by factory.All the parameters above are only for reference, detection heiahtis 2.2M.Detection range will be different because of the making material of door and ground.please adjust the sensitivity by the knob mentioned above.
M-204G Microwave sensor
With high sensitivity , quick response and detection accuracy to meet different kinds of autodoor requirements, Permeability is very good, it can be used in commercial, industrial and automatic control fields.
M-211 Lithium battery access control reserve power
1.The power supply is suitable for building intercom, various entrance and entrance guard controller, providing DC12V current when charged, and providing DC current through battery when power failure.